Attempting to install ITBM provided by Gigabyte results in an error "This computer does not meet the minimum requirements for installing the software."

CPU: 7900X

Motherboard: Gigabyte X299 Aorus Gaming 7 (BIOS F7D)

RAM: 32GB Corsair CMU32GX4M4C3000C15

Disk: Multiple SSD from SATA to M.2

OS: Windows 10 Pro x64 (fully updated as of 7/14/2017)

I've installed the chipset, ME and all available drivers provided either from Gigabyte or directly from the manufacturer. There are no unknown devices in device manager. Turbo Boost 3.0 and hyperthreading are manually set to enabled in BIOS and all other CPU settings are left on stock settings. XMP Memory profile is loaded.

This happened even with the F6 BIOS version. I updated to F7D and did a fresh format of Windows 10 x64 Pro only to run into this exact same error message.

Please advise on why my system is not able to install Turbo Boost 3.0 or what further information will assist you in debugging this. What checks is this software performing to determine that my system does not meet the minimum requirements?

Thanks,

Greetings

Does VROC require disabled CSM?

I have CSM enabled, because I can't enable it due to bug in BiOS/UEFi. This is Gigabyte X299 Gaming 9 running newest BiOS/UEFi [F6f] + 1 x AiC PCi-e Intel 750 1.2 TB + 2 x U.2 Inte 750 1.2 TB.

Please advise

Kind regards

Bryan

P.S.: Does VROC raid0 require dongle? Or is it free? [not raid1!]

Hope someone can help me here.

After a fresh install of Windows 8.1 Pro my media type is correctly set under the analyse and optimise function. This is using the in box drivers of Windows 8.1. When I install the latest RST and update the RAID drivers, the media type changes to SSD which is incorrect. The analyse and optimise buttons are now greyed out and I can no longer defrag the hard drives.

I have taken many steps to try and correct this issue but still no luck. The BIOS is set to UEFI and it correctly identifies the HDD. I have also used the F6 driver installation of the latest RAID driver during the Windows install. Media type is still set to SSD.

Intel RST status correctly states that SATA HDD are connected. So is it a Windows problem?

Very frustrating. Any help would be appreciated.

Surely Im not the only person in the world with this problem.

Kind Regards

System Specs

Motherboard: MSI Z87-G45

CPU: Intel 4770K

Memory: Corsair Dominator 32GB

HDD: WD Black 500GB (Raid 0) 128KB Stripe

GPU: Geforce GTX 770

In Lenovo Idea pad 510 series running on windows 10, there is a tray Icon which says intel RST service is not running.

Here I would attache the pic of the error occurring.

I have uninstalled the program but not able to reinstall it again.

but the re installation is being failed , i will attach the log file below

How can i resolve the error ?

Hello support Intel.

I recently acquired an I7-7700K as well as a motherboard MSI Z270 TOMAHAWK. In my device manager, the A2B1 controller has a problem:

"Device status.
Windows can not load the necessary drivers. The device does not work properly. (Code 31)
The specified request is not a valid operation for the target device."

Can I find out what this controller is all about and how to fix it? Windows 10 was installed the last week and all my drivers are up to date.

Attached is the report created by "Intel System Support Utility".

Waiting for your answer, Natalino.

Hi,

I have to configure a RMM software on a couple of machines which have some Intel stuff on-board. I thought the easiest way would be to monitor the Windows Event logs, but I don't know in which event logs and under which source name the Intel stuff reports.

Some Examples:

* Intel Network Connections

* Intel Graphic Driver

* Intel Management Engine Components

* Intel Rapid Storage Technology

* Intel Security Assist

* Intel USB 3.0 Host Controller Adaptation Driver

* ...

I know not everything is important, and needs to be monitored. But for Example The Intel Rapid Storage Technology should be in charge of the harddisks, and it would be nice to know if there is a problem.

Thanks for any information/help,

Christian.

Hi,

I'm looking for driver for Intel SD Host Controller for Windows 7 x64

Device ID: ACPI\VEN_8086&DEV_0F14 or ACPI\80860F14 as it appears in Windows 10 installed there now.

Hardware identifier apps detect that that's part of Braswell chipset.

Please help with finding the driver.

What I checked:

1. Intel and Dell driver download resources for drivers for chipset, including extraction of drivers from all relevant driver packages.

2. Intel's and Dell's Update apps to find drivers.

3. Whatever Windows 7 installation app gets from the internet when pointed to go online at the start of Windows 7 installation, as there is an option to get drivers from internet at the beginning if Widows 7 installation is running from under Windows 10.

4. Alternative websites and forums for drivers.

5. Driver packages from other vendors for their laptops using likely the same hardware.

6. Drivers for Windows 10 and Windows 8.

7. Dell's support including phone based ones.

8. BIOS update - done, didn't help.

Nothing helped.

Details:

I can't get drivers for Windows 7 using Windows Update as now I have Windows 10 installed on that laptop. I can't use any kind of driver downloader app as now I have Windows 10 on a laptop I need drivers for, and that downloaders can get drivers only for OS version they are installed on. I need that driver to install Windows 7 x64 on Dell Inspiron 14 (3452) laptop.

Now when I start Windows 7 installation from under Windows 10 it comes to a list of paritions and when I select required partition it shows error message "Windows needs the driver for device [Intel SD Host Controller]. Click 'Load Driver' and load the required device". I can't install to other partitions as they are reserved/hidden and are of 900 MB max size, and show the same error message.

When I start Windows installation from media using it as boot device it just doesn't see the eMMC drive.

Background:

Laptop has Windows 10 on board preinstalled which gives about 500 MB free space left on a 32 GB eMMC card and tends to consume all free space which ultimately makes system non working. That card is there instead of HDD or SSD. Consuming space is not the only reason for moving to Windows 7, and using Windows 10 is strongly not preferred option.

I'm not a wiz at this stuff so bear with me please. I'm looking for help in location the driver(s) for this.

It's a new generic box I just bought, I've loaded W10 32 bit and everything is there except the driver mentioned in the title. (Code 28)

This is the info I was able to pull from it.

Intel Core I5 7200U @2.5GHZ

Kaby Lake-U/Y Socket 1356 FCBGA

Motherboard: Intel SKYBAY

American Megatrends Bios 5.12

MS Basic Display Adapter - Manuf - Intel

If more info is required, just ask.

Thanks,

Hi, I've just got some issues while doing the certification for the system. The latest version of the Chipset Software 10.1.1.42 with the Windows 10 Creators Update (Redstone 2). And the outcome of this test would be fail. Is anyone have the same issue as well?

-----------------------------------

Start Test 6/17/2017 10:37:03.663 AM PCI\VEN_8086&DEV_A123&SUBSYS_86941043&REV_31\3&11583659&0&FC

Message 6/17/2017 10:37:03.663 AM Name: Intel(R) 100 Series/C230 Series Chipset Family SMBus - A123

Message 6/17/2017 10:37:03.663 AM Device Class: System devices

Message 6/17/2017 10:37:03.663 AM Device Description: Intel(R) 100 Series/C230 Series Chipset Family SMBus - A123

Message 6/17/2017 10:37:03.663 AM Problem Code: 0

Message 6/17/2017 10:37:03.663 AM Installed Driver File: c:\windows\inf\oem3.inf in catalog C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\oem3.cat.

Message 6/17/2017 10:37:03.663 AM Certification Submission ID: 29989500

Message 6/17/2017 10:37:03.663 AM Checking: "DriverTrustLevel". Has value: "Trusted: Certified".

Message 6/17/2017 10:37:03.663 AM Expected Certification Level: 1000 5000 8000 , Actual Certification Level: 5000

Message 6/17/2017 10:37:03.663 AM Expected OS Attribute: _v100_X64_RS2, Actual OS Attribute: 7X86,7X64,Server2008R2X64,8X86,8X64,Server2012X64,_v63,_v63_X64,_v63_Server_X64,_v100,_v100_X64,Server_v100_X64,_v100_RS1,_v100_X64_RS1,Server_v100_X64_RS1

Error 6/17/2017 10:37:03.663 AM Problem: "Not certified for this version of Windows": This file, which is part of a driver package, is certified, but for a different operating system..

Solution: Contact the driver vendor for the correctly signed driver package for the installed operating system and install that driver package..

File:    Line: 0

Error Type:   

Error Code:   0x0

Error Text:   Error 0x00000000

-----------------------------------

Published name :            oem3.inf

Driver package provider :   INTEL

Class :                     System devices

Driver date and version :   01/01/1970 10.1.1.42

Signer name :               Microsoft Windows Hardware Compatibility Publisher

i do not know what chip set or compute stick i have, im looking for drivers that will work, i had just upgraded to windows 10 creators update and it installed driver dated 1/12/2016 or something. and i uninstalled because it said in device manager "device is working" but system tray said "no audio output or something installed"

I than ran in to a issue of unknown device, installed the intel update tool and it than would say no audio installed in tray than change to the normal icon but than no audio will play and when opening the sound settings it will freeze and what not.

im needing some drivers from 2015 as i think those will work. i cant find drivers from insignia or anywhere else. and i cant revert the drivers.

My Intel driver update utility says "Failure, unknown error." whenever I try to update the Intel Chipset Device Software (INF Update Utility-EXE Only) on my computer. I am currently on driver version 10.0.15063.0 and the latest version shows up as 10.1.1.14 instead of 10.1.1.42. Why is this and how do I fix it?

I run the Intel(R) Driver Update Utility 2.8.2. It tells me that I need to update

But when I download the SetupChipset.exe and begin to update, it tells me that

Unknown error.

The log files are attached in the attachment.

And the system information is here:

What should I do?

GPU-Z has a field in the sensor tab which gives the video card 'memory controller load'. I think this is the collection of transistors responsible to passing information between the video card RAM and the GPU. I believe that the CPU and system RAM has an equivalent memory controller located in the northbridge. I would like to know what the load is on this memory controller because I'm trying to understand why I'm being told my inadequate hardware is the reason for dropped frames when previewing video during editing despite the fact that none of the parameters I can measure suggest a hardware bottleneck (CPU, GPU and GPU mem controller <25%, mostly ~15%).

I've been trying to update my graphic driver basically since I forever. I tried using Intel Driver Update Utility and found what's called "Intel Chipset Device Software (INF Update Utility-EXE Only)". So of course, I downloaded it. However, when I'm downloading the actual driver, the progress bar dropped back down and said there's an "Unknown error". I viewed the log file and this is what it says at the end:

[1D68:1A48][2017-07-21T15:43:00]e000: Error 0x80070643: Failed to install MSI package.

[1D68:1A48][2017-07-21T15:43:00]e000: Error 0x80070643: Failed to execute MSI package.

[158C:1E3C][2017-07-21T15:43:00]e000: Error 0x80070643: Failed to configure per-machine MSI package.

[158C:1E3C][2017-07-21T15:43:00]i319: Applied execute package: SetupChipsetx86.msi, result: 0x80070643, restart: None

[158C:1E3C][2017-07-21T15:43:00]e000: Error 0x80070643: Failed to execute MSI package.

[1D68:1A48][2017-07-21T15:43:00]i301: Applying rollback package: SetupChipsetx86.msi, action: Uninstall, path: (null), arguments: ' MSIFASTINSTALL="7" IIF_MSI_SWITCHES="" ARPSYSTEMCOMPONENT="1"'

[1D68:1A48][2017-07-21T15:43:01]e000: Error 0x80070643: Failed to uninstall MSI package.

[1D68:1A48][2017-07-21T15:43:01]e000: Error 0x80070643: Failed to execute MSI package.

[158C:1E3C][2017-07-21T15:43:01]e000: Error 0x80070643: Failed to configure per-machine MSI package.

[158C:1E3C][2017-07-21T15:43:01]i319: Applied rollback package: SetupChipsetx86.msi, result: 0x80070643, restart: None

[1D68:1A48][2017-07-21T15:43:01]i329: Removed package dependency provider: {2230F0A4-4566-448D-8F7E-40588907934D}, package: SetupChipsetx86.msi

[1D68:1A48][2017-07-21T15:43:01]i351: Removing cached package: SetupChipsetx86.msi, from path: C:\ProgramData\Package Cache\{2230F0A4-4566-448D-8F7E-40588907934D}v10.1.2.86\

[1D68:1A48][2017-07-21T15:43:01]i372: Session end, registration key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{26c576b1-592d-4155-b546-d623123cbe8c}, resume: None, restart: None, disable resume: No

[1D68:1A48][2017-07-21T15:43:01]i330: Removed bundle dependency provider: {26c576b1-592d-4155-b546-d623123cbe8c}

[1D68:1A48][2017-07-21T15:43:01]i352: Removing cached bundle: {26c576b1-592d-4155-b546-d623123cbe8c}, from path: C:\ProgramData\Package Cache\{26c576b1-592d-4155-b546-d623123cbe8c}\

[1D68:1A48][2017-07-21T15:43:01]i371: Updating session, registration key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{26c576b1-592d-4155-b546-d623123cbe8c}, resume: None, restart initiated: No, disable resume: No

[158C:1E3C][2017-07-21T15:43:01]i000: ** MBA ** Apply complete. Status: '-2147023293' Restart: 'None' Result: 'None'

[158C:1E3C][2017-07-21T15:43:01]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart:  No

[158C:1B44][2017-07-21T15:43:01]e000: ** MBA ** Unknown error.

I did not open any other application, as recommended. So how can I fixed this?!

Hi, I have HP Envy 15 with Win 10.

The problem is when I want to turn off the system. The screen goes off but the keyboard is still lit and nothing can be done, only thing is to remove the battery or turn off  "hard".
I am sending an SSU report in the attachment

Hi.

Like many others I tried to upgrade my B960 to i3 2328m & i7 2670m.

Like many others I got 30 min perfectly working laptop after upgrade. (it restarts each 30 minutes).

Downgrade back to B960 solves this problem (no unwilling restarts)

Some users say that its a "low budget laptop" restriction for upgrade incorporated by Intel in HM 70 (at least as an option for oem vendors).

Many others say that resoldering to HM 75/76/77 chipset is the only option to upgrade to "I" CPUs (that reaffirms "low budget" statement)

I tried to think about it for a moment:
we have "limited" chipset
it has a timer, that turns off the power

I bet it is part of the BIOS that checks for "right" plugged CPU.

Also I guess its a chipset firmware CPU verification - so that must be (un / modified) Intel ME firmware.

So my question is:

Where can I get functional description of the HM-70 CPU binding feature in ME firmware?

Olá,

Comprei recentemente um laptop e observei que antes o Intel RST funcionava corretamente. Mas agora ele de repente não está mais funcionando e aparece uma mensagem de erro, aparece que  o Intel RST não está em execução. Gostaria de solucionar isto, pois percebi que o laptop desde então está lento na inicialização e caiu o rendimento dele. Desde já agradeço.

Hi,

I like to set up my C222 RAID controller to be used with XenServer 7.2 but I failed.

I managed to set it up with CentOS7.2 ( kernel 3.10 ) with the packages provided.
But I do not succeed with XEN as it runs on CentOS7.2 but with a 4.4 kernel:

1/ hardware
00:1f.2 RAID bus controller: Intel Corporation 8 Series/C220 Series Chipset Family SATA Controller 1 [RAID mode] (rev 05)
        Subsystem: ASUSTeK Computer Inc. Device 8552
        Kernel driver in use: ahci
# instead of ahci this should become the compiled megasr module

2/ xen
[root@tstxen ~]# cat /etc/redhat-release
XenServer release 7.2.0 (xenenterprise)

[root@tstxen ~]# uname -a
Linux tstxen 4.4.0+10 #1 SMP Thu May 11 16:35:25 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

So I went to " http://https://downloadcenter.intel.com/ " and downloaded
the Embedded Server RAID Technology 2 RAID Driver for Linux: "ESRT2_Linux_DRV_v17.01.2016.0216_r3.tgz"
#for 7.3 there is another available

Unpacked this on XenServer DDK ( Driver Development Kit ) VM and executed: " make -C /usr/src/kernels/4.4.0+10-x86_64 M=/tmp/megasr-raid5/shim/library/rhel7-64 "
This resulted in modules built, but with lots of warnings ( see logs attached ).

[root@localhost rhel7-64]# ls -l /tmp/megasr-raid5/shim/library/rhel7-64
total 37496
-rw-r--r-- 1 root root        8 Jul 30 08:34 built-in.o
-rw-r--r-- 1 root root      248 Feb 16  2016 Makefile
-rw-r--r-- 1 root root 12828544 Jul 30 08:34 megasr.ko
-rw-r--r-- 1 root root 12581296 Feb 16  2016 megasr-lib.a
-rw-r--r-- 1 root root    70110 Jul 30 08:34 megasr.mod.c
-rw-r--r-- 1 root root   254048 Jul 30 08:34 megasr.mod.o
-rw-r--r-- 1 root root 12576043 Jul 30 08:34 megasr.o
-rw-r--r-- 1 root root       57 Jul 30 08:34 modules.order
-rw-r--r-- 1 root root        0 Jul 30 08:34 Module.symvers

Executing " insmod megasr.ko " results in:

[root@localhost rhel7-64]# insmod megasr.ko
insmod: ERROR: could not insert module megasr.ko: Unknown symbol in module

Therefore can one guide me building a proper kernel module please, perhaps using dkms instead ( /tmp/megasr-raid5/RPM )?

thanks

I am using 7700K this time.

The main board is Asrock Fatality Gaming K6

The OS is Windows 10 Home.

But in Device Manager, there is an exclamation point.

So if you look

"KabyLake PCI Express Root Port # 10 - A2b1" This is the message."

So if you look at properties

"The device does not work properly because Windows can not load the required driver (code 31).

The specified request is an invalid operation on the target device. "

I get this message.

How does this exclamation disappear?

Is there no problem without using this?

I've reinstalled Windows several times to fix this.

But it did not work out.

I want you to solve it.

Thanks for reading.

I tried to update my intel drivers with the uptdate utility, everything went well, but when I tried to install the update an unexpected error didn't let me. Here I attached the logs and my computer information.